AArch64 calling convention

The 64-bit ARM (AArch64) calling convention allocates the 31 general-purpose registers as:[2]

x31 (SP): Stack pointer or a zero register, depending on context.
x30 (LR): Procedure link register, used to return from subroutines.
x29 (FP): Frame pointer.
x19 to x29: Callee-saved.
x18 (PR): Platform register. Used for some operating-system-specific special purpose, or an additional caller-saved register.
x16 (IP0) and x17 (IP1): Intra-Procedure-call scratch registers.
x9 to x15: Local variables, caller saved.
x8 (XR): Indirect return value address.
x0 to x7: Argument values passed to and results returned from a subroutine.

All registers starting with x have a corresponding 32-bit register prefixed with w. Thus, a 32-bit x0 is called w0.

Similarly, the 32 floating-point registers are allocated as:[3]

v0 to v7: Argument values passed to and results returned from a subroutine.
v8 to v15: callee-saved, but only the bottom 64 bits need to be preserved.
v16 to v31: Local variables, caller saved.

From: https://en.wikipedia.org/wiki/Calling_convention#ARM_(A64)

NanoPi M4 GPIO

 +------+-----+----------+------+ Model  NanoPi-M4 +------+----------+-----+------+
 | GPIO | wPi |   Name   | Mode | V | Physical | V | Mode |   Name   | wPi | GPIO |
 +------+-----+----------+------+---+----++----+---+------+----------+-----+------+
 |      |     |     3.3V |      |   |  1 || 2  |   |      | 5V       |     |      |
 |      |     | I2C2_SDA |      |   |  3 || 4  |   |      | 5V       |     |      |
 |      |     | I2C2_SCL |      |   |  5 || 6  |   |      | GND(0V)  |     |      |
 |   32 |   7 | GPIO1_A0 |  OUT | 0 |  7 || 8  |   | ALT  | GPIO4_C1 | 15  |  145 |
 |      |     |  GND(0V) |      |   |  9 || 10 |   | ALT  | GPIO4_C0 | 16  |  144 |
 |   33 |   0 | GPIO1_A1 |   IN | 0 | 11 || 12 | 1 | IN   | GPIO1_C2 | 1   |  50  |
 |   35 |   2 | GPIO1_A3 |   IN | 0 | 13 || 14 |   |      | GND(0V)  |     |      |
 |   36 |   3 | GPIO1_A4 |   IN | 0 | 15 || 16 | 0 | IN   | GPIO1_C6 | 4   |  54  |
 |      |     |     3.3V |      |   | 17 || 18 | 0 | IN   | GPIO1_C7 | 5   |  55  |
 |      |     | UART4_TX |      |   | 19 || 20 |   |      | GND(0V)  |     |      |
 |      |     | UART4_RX |      |   | 21 || 22 | 0 | IN   | GPIO1_D0 | 6   |  56  |
 |      |     | SPI1_CLK |      |   | 23 || 24 |   |      | SPI1_CSn |     |      |
 |      |     |  GND(0V) |      |   | 25 || 26 |   | ALT  | GPIO4_C5 | 11  |  149 |
 |      |     | I2C2_SDA |      |   | 27 || 28 |   |      | I2C2_SCL |     |      |
 |      |     | I2S0_LRX |      |   | 29 || 30 |   |      | GND(0V)  |     |      |
 |      |     | I2S0_LTX |      |   | 31 || 32 |   |      | I2S_CLK  |     |      |
 |      |     | I2S0_SCL |      |   | 33 || 34 |   |      | GND(0V)  |     |      |
 |      |     | I2S0SDI0 |      |   | 35 || 36 |   |      | I2S0SDO0 |     |      |
 |      |     | I2S0I1O3 |      |   | 37 || 38 |   |      | I2S0I2O2 |     |      |
 |      |     |  GND(0V) |      |   | 39 || 40 |   |      | I2S0I3O1 |     |      |
 +------+-----+----------+------+---+----++----+---+------+----------+-----+------+

Over!